I-10 freeway noise in Los Angeles
Updated
Modeled estimates for general information only — not measurements, not a guarantee, and not for legal, medical or real-estate decisions.
The I-10 is the Santa Monica Freeway west of downtown and the San Bernardino Freeway to the east. In the Quiet LA map data it runs from Santa Monica across the middle of Los Angeles and the San Gabriel Valley to Pomona and Claremont. This page shows where it runs, which rail lines it crosses, and what the model says about the level at buildings at different distances from it.
Where the I-10 runs
In the map’s road data, Interstate 10 (Santa Monica and San Bernardino Freeways) is about 90 km long inside the area the map covers. It runs through 12 cities and communities and 13 City of Los Angeles Neighborhood Council areas. An area is listed when at least half a kilometer of the freeway lies inside its boundary; the lists are alphabetical, and being on one says nothing about how loud an area is.
Cities and communities: Alhambra, Baldwin Park, Claremont, East Los Angeles, El Monte, Monterey Park, Pomona, Rosemead, San Dimas, San Gabriel, Santa Monica, West Covina.
Neighborhood Council areas in the City of Los Angeles: Boyle Heights, Downtown Los Angeles, Empowerment Congress North Area, Historic Cultural North, Mar Vista, Mid City, Palms, Pico Union, South Robertson, United Neighborhoods, West Adams, West Los Angeles Sawtelle, Westside.
Airports and rail lines near the I-10
Airport reference points within 5 km of the freeway, with the distance to its nearest part: Santa Monica Airport (SMO), 1.3 km; El Monte Airport (EMT), 2.0 km; Brackett Field (POC), 2.1 km.
The map adds its aircraft estimate, derived from official airport contours, to the 24 h value only, inside the estimated 55 CNEL line. Day, Evening and Night never include aircraft.
The map’s rail data crosses the freeway at: Metrolink Orange County Line in Downtown Los Angeles (not in the rail model); Metrolink Orange County Line in Historic Cultural North (not in the rail model); Metrolink Riverside Line in Boyle Heights (not in the rail model); Metrolink San Bernardino Line in Alhambra (not in the rail model); Metrolink San Bernardino Line in Baldwin Park (not in the rail model); Metrolink San Bernardino Line in El Monte (not in the rail model); Metrolink San Bernardino Line in LA-32 (not in the rail model). Only the San Fernando Valley main lines are in the rail model, so a train on any other line is not in these numbers. See train and rail noise.
Modeled levels by distance from the I-10
Across 883,237 modeled building-façade points within 1 km of the I-10, the median 24-hour level is 73.0 dB CNEL within 100 m of the freeway and 59.4 dB CNEL 500 m to 1 km. The figures are from the map data release of 15 October 2026, 17:53 UTC; the live map may show a different release.
| Distance from the freeway | Points | 1 in 10 below | Median | 1 in 10 above | Night median |
|---|---|---|---|---|---|
| 24-hour level (CNEL) and Night (10 pm–7 am, LAeq) | |||||
| within 100 m | 55,215 | 64.3 dB | 73.0 dB | 79.7 dB | 65.0 dB |
| 100 m to 250 m | 132,610 | 57.8 dB | 67.8 dB | 73.2 dB | 60.0 dB |
| 250 m to 500 m | 227,529 | 53.5 dB | 63.6 dB | 69.6 dB | 55.7 dB |
| 500 m to 1 km | 467,883 | 49.6 dB | 59.4 dB | 66.9 dB | 51.6 dB |
The points are building façades of every kind, 4 m up and 2 m out from the walls, not homes. They are modeled estimates, not measurements. At a single spot the model is typically about 6 dB off, and near freeways it runs about 4 dB loud on average, with a wide spread, so use the table for the shape of the drop with distance and not for any one building. Sound walls the lidar detected, buildings and hills are in the model; walls it did not detect are not. See Limits.
The model treats the I-10 as it treats every road. See freeway and road noise in Los Angeles for traffic, trucks, sound walls and weather, How it’s made for the method and Limits for what the numbers cannot be used for.
Open this on the map
Each link opens the map at that place in the 24-hour view. Switch to Night in the panel for the night level, and select a building to read its modeled values. The legend at the right edge of the map explains the colors.
Common questions
How loud is the I-10 freeway?
Quiet LA does not measure it; it models it. Within 100 m of the I-10, the median modeled 24-hour level at building façades is 73.0 dB CNEL (1 point in 10 is below 64.3 dB and 1 in 10 above 79.7 dB), and the median Night level is 65.0 dB. A modeled number is an average over a period, not what one passing truck sounds like. See what 45, 55 and 65 dB mean.
How far does I-10 freeway noise reach?
In the map data the median 24-hour level at building façades falls from 73.0 dB within 100 m of the I-10 to 59.4 dB 500 m to 1 km, and the spread within each band is wide. In general acoustics, steady traffic loses about 3 dB each time the distance doubles, and the first row of buildings beside a highway typically shields the rows behind it by about 3 to 5 dB (Caltrans). See freeway and road noise.
Do sound walls reduce I-10 freeway noise?
Where a barrier blocks the line of sight between the road and a listener, it lowers the level; Caltrans gives about 5 dB for a barrier whose top just reaches that line. The map includes the freeway sound walls it could detect in lidar and leaves out walls it did not detect and private walls, so a wall you can see may not be in the model. See who to call about noise in Los Angeles for how sound wall requests work.
Who do I contact about I-10 freeway noise?
Caltrans runs the state highways, and its District 7 office covers Los Angeles; the Caltrans contact page lists (213) 897-1200. Quiet LA is a model and cannot say whether any rule is met. The full list of contacts is in who to call about noise in Los Angeles.
Sources
- Caltrans: Technical Noise Supplement to the Traffic Noise Analysis Protocol (September 2013) Spreading with distance (section 2.1.4), buildings as shields (page 2-35) and noise barriers (page 2-41).
- Caltrans: Contact Us District 7 (Los Angeles) contact details, checked 21 October 2026.
- Caltrans: Traffic Census Program Traffic and truck counts for the State Highway System, one of the count sources Quiet LA uses.